May 5, 2019
All Bloomington drivers have blind spots – and no, I'm not talking about the fact that you really don't sing like Adele. I mean the areas of the road that you can't see when you're driving around Bloomington.
First let's talk about our own blinds spots, and then we can talk about others...
To begin, we can greatly reduce blind spots by properly adjusting our mirrors to give the widest coverage possible. Make the adjustments in your vehicle before you start to drive.
First, Bloomington drivers should adjust their rear view mirrors to give the best possible view directly to the rear of their vehicle. Bloomington folks don't need it to get a better view of either side of the car, the kids in the back seat or their dazzling smile. It's pretty obvious, the rear view mirror should reflect the rear.
Next, lean your head until it almost touches the driver's side window. Adjust your side mirror so that you can just barely see the side of your car. Now, lean your head to the middle of the car and adjust the outside mirror so that you can barely see the right side of the car.
When Bloomington drivers adjust their mirrors this way, they'll have maximum coverage. Of course driving is a dynamic process – things change every second on Illinois roads and busy highways. So it's wise to take a quick look to the side when passing to make sure that another vehicle hasn't moved into an area you couldn't see in your mirrors.
As you drive around the Bloomington area, avoid staying in others' blind spots. You can't count on them to be watching their mirrors and looking out for you.
Here are some tips for passing a heavy vehicle on Illinois roads:
Avoid the blind spots. If you can't see the drivers face in one of his mirrors or in a window, he cannot see you!
Don't follow too close. If you can't see one of the truck's mirrors, you're too close.
Make sure there is plenty of room to pass. Trucks are long and take time to get around. If you're on one of our local two-lane highways, wait for a passing zone.
Don't linger when passing. Because the blind spots are so big on the sides, you want to get through them quickly. If you can't pass quickly, drop back.
Pass on the left whenever possible. A trucks' blind spot is much larger on the right.
The team of automotive professionals at Tuffy Bloomington want you to watch those blind spots – but feel free to sing in the shower all you want.
Tuffy Bloomington
1505 East Vernon Avenue
Bloomington, Illinois 61701
309.662.0537
March 9, 2025
For most drivers, at some point youre going to have a flat tire. Depending on how it was damaged, it may have to be replaced. But sometimes, a repair will do the trick, as long as the puncture isnt on the sidewall and the hole is smaller than inch/6.35mm in diameter. Here are the three common w... More
March 2, 2025
What's the dif? To an automotive technician, it's the differential, a part of your vehicle that helps direct power from the engine to the wheels. The differential is a gearbox that enables the drive wheels to turn at different speeds (they do that when you turn). Inside the differential is a f... More
February 23, 2025
Winter is one of the hardest times to keep your vehicle clean. But did you know neglecting to wash your vehicle in winter could cost you a significant amount of money in the long run? Here's why. Many areas deal with snow and ice in the winter, and the salt and sand that are used to keep the road... More